Drive Mflex L/S 100RPM 115/230

Specifications & Description

Cloud Connected - No
Pump Series - L/S
Control Type - Digital
Min RPM (rpm) - 0.02
Max RPM (rpm) - 100
Speed - Variable
Speed Control - Â±0.1% (0.01 rpm at 100 rpm)
Max Flow Rate (mL/min) - 566
Min Flow Rate (mL/min) - 0.001
Reversible Motor - Yes
Digital Dispensing - Yes
No. of Pump Heads Accepted - 4
Type of Pump Heads Accepted - Standard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm, Cytoflow
Motor (watts) - 75
Drive IP rating - IP 33
Washdown Capable - No
Power (VAC) - 90 to 260
Power (amps) - 2.2
Power (Hz) - 50/60
Drive Length (in) - 10
Drive Width (in) - 8.5
Drive Height (in) - 8.5
Drive Length (mm) - 254
Drive Width (mm) - 216
Drive Height (mm) - 216
Open-Head Sensor - No
Housing Material - ABS Plastic and Aluminum
Motor hp - 1/10
Remote I/O - RS-232, USB, 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
Description - L/S Digital Drive, Computer-Compatible, 0.02 to 100 rpm; 115/230 VAC

INCLUDES

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country specific plug/cord set; please specify ultimate destination when ordering.

KEY FEATURES

Flow rate 0.001 to 3400 mL/min with L/S tubingâ€”flow rate depends on drive rpm pump head, and tubing size
Digital interface with graphical LCD shows pump performance and operating modeâ€” continuous run, timed dispense, copy dispense, or volume dispense
Remote control available using analog communicationâ€”voltage, current and contact closure
Dispense by Volume in mL (0.001 to 9,999 mL), L, or gal; Copyâ€”1 to 9,999 dispense cycles; or Timeâ€”time interval of on/off cycles (1 sec to 99 hr, 59 min, 59 sec per cycle)
Antidrip function ensures dispensing accuracy
Models with open-head sensor stops the drive when the pump head is opened (when used with sensor-equipped pump head)
Interface with a PC via RS-232 or USB connection

MORE ABOUT THIS ITEM

These precision drives offer digital and analog remote control (I/O) options and simple programmingâ€”ideal for automated process and network applications. Drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing. Programmed calibration ensures dispense and display accuracyâ€”drive stores one calibration value per tubing size. Program the drive via the simple membrane keypad or remotely; keypad lock/unlock feature protects settings. Motor is reversible so you can purge tubing before or after pumping and pump fluid in either direction.

More Information