Close
Thermal HS bath fluid 5 liters (+50...+250 °C)
SKU
JU/AC/O/8940103
Brand
JULABO
Pre-order (Deliver in 8 to 12 weeks)
Thermal HS
JULABO Thermal HS is a bath fluid based on silicone.
Please note: Usage of the fluid below the lowest mentioned working temperature may result in temperature fluctuation or high temperature alarm due to hot fluid areas around the heater. Recommendation: Reduce the heater capacity during heating up until the lowest mentioned working temperature is reached. Do not use with silicone hoses! Silicone-based bath fluids can swell and dissolve silicone hoses. Therefore use JULABO metal tubing or JULABO Viton tubing or JULABO PTFE tubing for the temperature control of external systems.
Please observe the information in our safety data sheet.
Advantages:
- High stability
- Good heat conductivity
- Minimal odor
- Long fluid life
| Order number 5 liters | 8940103 |
|---|---|
| Order number 10 liters | 8940102 |
| Working temperature | +50 ... +250 °C |
| Flash point | +270 °C |
| Fire point | +360 °C |
| Viscosity (kinematic at 20 °C) | 55 mm²/s |
| Density (at 20 °C) | 0.96 g / cm³ |
| Pour point | <-60 °C |
| Boiling point | >300 °C |
| Ignition temperature | >+400 °C |
| Color | light brown |
| Thermal expansion coefficient | 0.00089 (g/(ml × K)) |
| Heat conductivity | 0.153 (W/(m × K)) |
| Specific volume resistivity | 6x10¹4 (Ohm × cm) |
| Brand | JULABO |
|---|
Write Your Own Review
More from JULABO
Who Viewed This Also Viewed
Validate your login