Close
Thermal M bath fluid 10 liters (+40... +170 DEG C)
SKU
JU/AC/O/8940100
Brand
JULABO
Pre-order (Deliver in 8 to 12 weeks)
Thermal M
JULABO Thermal M is a bath fluid based on alcohol ethoxylate.
Please note: Usage of the fluid below the lowest mentioned working temperature may result in temperature fluctuation or high temperature alarm due to hot fluid areas around the heater. Recommendation: Reduce the heater capacity during heating up until the lowest mentioned working temperature is reached. Please observe the information in our safety data sheet.
Advantages:
- High stability
- Low viscosity
- Good heat conductivity
- Minimum odor
- Long fluid life
| Order number 5 liters | 8940101 |
|---|---|
| Order number 10 liters | 8940100 |
| Working temperature | +70 ... +170 °C |
| Flash point | +284 °C |
| Fire point | +306 °C |
| Viscosity (kinematic at 20 °C) | 293 mm²/s |
| Density (at 20 °C) | 1.15 g / cm³ |
| Pour point | -39 °C |
| Boiling point | >+170 °C |
| Ignition temperature | >+255 °C |
| Color | clear |
| Thermal expansion coefficient | 0.00077 (g/(ml × K)) |
| Heat conductivity | 0.2 (W/(m × K)) |
| Specific volume resistivity | n.a. (Ohm × cm) |
| Brand | JULABO |
|---|
Write Your Own Review
More from JULABO
Who Viewed This Also Viewed
-
Polycap HD 75, 10.0/20.0µm, Inlet: 0.125 inch FNPT, Outlet: 0.125 inch FNPT, 5/pack Brand: WHATMAN SKU: WH/2714T -
-
-
-
Roby Automated Filter 25mm, Regenerated Cellulose with Glass Fibre prefilter GF92, 0.45µm, 1000/pk Brand: WHATMAN SKU: WH/10463808
Validate your login