Close
Vacuum Pump 6.9CFM 115/230V
SKU
CP/PU/O/P-79303-20
Brand
COLE-PARMER
Pre-order (Deliver in 8 to 12 weeks)
Wide range of free-air capacities to match specific applications
- Positive pressure oil system ensures proper lubrication and prevents oil starvation at high gas loads
- Fast acting inlet valve protects internal components against oil and air contamination if the pump stops while under vacuum
- Gas ballast valve limits internal condensation—use pump when condensable vapors are present
Specifications & Description
- Wetted Parts - Cast iron, stainless steel, aluminum, Buna N, and flouroelastomers
- Free Air Capacity (CFM) - 5.9
- Free Air Capacity (LPM) - 167
- Max Vacuum (with ballast) - 4 x 10-2 mm Hg
- Max Vacuum (without ballast) - 1.5 x 10-3 mm Hg
- Inlet Port - NW 25
- Outlet Port - NW 25
- Noise Level - 48 dB(A)
- Oil Capacity (Liters) - 0.75
- Oil Capacity (oz) - 25
- Max Temperature (
° F
) - 104 - Max Temperature (
° C
) - 40 - Duty Cycle - Continuous
- Motor Type - TEFC
- Power (VAC) - 115 / 230
- Power (Hz) - 50/60
- Power (amps) - 3.3
- Height (in) - 8.875
- Width (in) - 6.25
- Length (in) - 18.5
- Height (cm) - 22.5
- Width (cm) - 15.9
- Length (cm) - 47
- Motor hp - 3/4
- Description - Direct-drive rotary vane vacuum pump, dual mode, 6.9 cfm, 115/230 VAC
INCLUDES
vacuum oil and power cord.
MORE ABOUT THIS ITEM
No need to purchase both single- and dual-stage pumps! Dual-mode pumps offer a choice of high-vacuum (HV) mode or high-throughput (HT) mode in one pump. Pumps also feature three-position gas ballast control. Set the pump to HV mode with gas ballast off for use with electron microscopes or mass spectrometers; set it to HT mode with gas ballast fully open for use with gel dryers, vacuum ovens, or rotary evaporators.
Power cord and plug are included with the pump.
| Brand | COLE-PARMER |
|---|
Write Your Own Review
More from COLE-PARMER
Who Viewed This Also Viewed
Validate your login