Pumphead Mlex 8-Channel 3Roll

Synchronous, multichannel flow from up to 8 channels

Cartridges snap in and out for fast tubing changesâ€”no need to remove pump head from the drive
Load pump heads with 1 to 8 cartridges
Mix large and small cartridgesâ€”one large cartridge occupies the same space as two small ones
Flow rate 0.074 to 1700 mL/min with microbore or L/S tubingâ€”flow rate depends on drive rpm, cartridge, and tubing size
Accepts 1 to 8 small or 1 to 4 large cartridges
Require drives with a minimum of 1/10 hp and a maximum of 600 rpm
Constructed with stainless steel rotor and bearings with polysulfone ends

MORE ABOUT THIS ITEM

Each pump head system is composed of a heavy-duty pump head and two sizes of snap-in tubing cartridges, each with individually adjustable occlusion settings (order cartridges separately). The occlusion â€œwedgeâ€ design provides accurate and more balanced flow control. Recommended for use with small cartridge 07519-80 and large cartridge 07519-70.

Specifications & Description

Pump Series - L/S
Number of Channels - 8
Max Flow Rate (mL/min) - 6800
Max Flow Rate Per Channel (mL/min) - 1700
Min Flow Rate Per Channel (mL/min) - 0.005
Max. Number of Cartridges (Large) - 4
Max. Number of Cartridges (Small) - 8
Housing Material - Polysulfone (PSF)
Tubing Retention - Stopped Tubing or Manual
Occlusion - Adjustable Tangential
Optimum RPM Range (rpm) - 0.02 to 600
Rollers - 3
Rotor Material - Anodized Aluminum
Suction Lift (ft) - 29
Suction Lift (m) - 8.8
Gear Ratio - 1:1
Tubing sizes accepted - Two-stop microbore, L/S 13, L/S 14, L/S 16, L/S 25, L/S 17
Volume Per Revolution With L/S 13 Tubing (mL) - 0.06
Volume Per Revolution With L/S 14 Tubing (mL) - 0.21
Volume Per Revolution With L/S 16 Tubing (mL) - 0.8
Volume Per Revolution With L/S 25 Tubing (mL) - 1.7
Volume Per Revolution With L/S 17 Tubing (mL) - 2.8
Length (in) - 5.75
Width (in) - 4.375
Height (in) - 4
Length (mm) - 14.6
Width (mm) - 111
Height (mm) - 102
Open-Head Sensor - No
Description - L/S Multichannel Cartridge Pump Head for Microbore and Precision Tubing, 8-Channel, 3-Roller