PCD650 Meter kit consists of: pH/mv/Ion/Cond/TDS/Res/Salinity/DO/Temp Meter,

Details

Rubber Boot, CD ROM, Multi probe holder, Manual, FC7252203B DJ pH electrode (3m), DOHANDYNEW (3m), 4 cell conductivity probe (3m), Adapter, Batteries, Kit Set (set of solutions 60 ml) (ECPCDW65044K) (01X430902)

Waterproof handheld meter that enables concurrent measurement of pH, ion, conductivity, TDS, salinity, dissolved oxygen and temperature, all at the same time.

:: Simultaneously measures and displays four parameters
:: ±1% full scale accuracy at 3-decimal resolution across a wide measurement range
:: Ion-measurement capabilities with 3-digit resolution
:: Accepts two-cell and four-cell conductivity probe to measure up to 500 m/s — meter measures pure water!
:: Selectable multi-point calibration for more accurate conductivity measurements or single-point calibration for quick, convenient calibration with no mistakes
:: Measures 90.00mg/L in DO concentration and 600% in DO saturation—one of the widest dissolved oxygen measurement ranges offered in the handheld market today
:: Fast and easy DO calibration with 100% calibration option against atmospheric air or 0% calibration against a zero solution
:: Salinity, Temperature and Pressure Compensation—accurate readings under varying conditions
:: No warm up time required with galvanic system of measurement
:: One-Glance-Tells-All Screen Display with Backlight
:: Electrode status report, calibration data and simultaneous display of up to 4 parameters
:: Rugged and IP67-rated waterproof for applications in harsh environments. Meter floats on water!
:: Easy-to-understand prompt messages for easy set-up, calibration and trouble-shooting
:: Recorded readings individually stamped with time and date in GLP compliant format
:: Auto-logging meter saves readings automatically within seconds to prevent data loss
:: HI-LO limit alarm for easy quality control – Meter alerts when readings fall outside selected ranges
:: Wireless Information Technology: No wires, no cables—Transfer data from meter to computer with the press of a button
:: Non-Volatile Memory protects information and meter settings, even when batteries run out
:: Four Levels of Password Protection prevents tampering or accidental data deletion
:: Calibration Alarm: No more out-dated calibration settings

Product Specification	Description
pH Range	-2.000 to 20.000 pH
Resolution & Accuracy	0.1/0.01/0.001 pH & ±0.002 pH
No. of pH Calibration Points	1 (Offset) to 6 points
pH Buffer Options	USA, NIST, DIN, PWB, Custom
mV Range	±2000.0 mV
Resolution & Accuracy	0.1 mV & ±0.2 mV
Ion Concentration Range	0.001 to 19900
Resolution & Accuracy	2 or 3 digits & ±0.5% FS (mono); 1% FS (div)
No. of Ion Calibration Pts	Up to 8
DO Range	0 to 90.00 mg/L or ppm / 0 to 600%
Resolution & Accuracy	0.01 mg/L or ppm / 0.1% ; ±0.2mg/L / ±0.2%
Salinity Correction	Automatic
Resolution & Accuracy	0.0 to 50.0ppt & 0.1 ppt
Barometric Pressure Correction	Automatic correction with built-in sensor
Resolution & Accuracy	450 to 825 mmHg / 59.9 to 109.9 kP & 0.1 mmHg or 0.1 kPa
Conductivity Range	.. to 500 mS/cm
Resolution & Accuracy	0.05% FS & ±1% FS + 1 LSD
Cell Constant	0.010 to 10.000
Temperature Coefficient	Linear & Pure
TDS Range	.. to 500.0 ppt
Resolution & Accuracy	0.05% FS & ±1% FS +1 LSD
Salinity Range	0 to 80 ppt
Resolution & Accuracy	0.05% FS & ±1% FS +1 LSD
Temperature Range	-10.0 to 110.0 °C / 14.0 to 230.0 °F (Meter)
Resolution & Accuracy	0.1 °C/°F & ±0.5°C/ ±0.9°F
Temperature Compensation	Automatic / Manual (0 to 100 °C)
Memory	500 Data Sets with Date/Time stamping & Security password protection
Output	IrDA Wireless Communications
Display	Multi-data Back-lit dot matrix; 7.2 cm (H) X 5.4 cm (W)
Special Functions	Auto-Calibration; Data-logging options with time/date indexed, GLP compliance; Simultaneous Display and measurement of 4 parameters; Cal-due alarm; pH slope/offset Display & Self-diagnostic
Power	4 X 1.5 V “AA” Alkaline batteries or 9 V DC adapter, 500 mA