Drive Mflex L/S 600RPM 115/230 (MFR # 07528-10-UK)

Donâ€™t lose control of your metering applicationsâ€”digital display gives you repeatable control

Flow rate 0.06 to 3400 mL/minâ€”flow rate depends on drive rpm, pump head, and tubing size
Three digit LED display shows motor rpm â€” confirm speed setting at a glance
Reversible motorâ€”purge tubing before or after pumping; pump fluid in either direction
LED indicators confirm motor direction
Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications
Separate speed and power (on/off) control â€” maintain speed setting while turning pump on/off
Stackable, splash-resistant ABS plastic housing; IP33 rated
Remote control capabilities via a DB9 female connector on back of drive
Speed control input: 4 to 20 mA or 0 to 10 VDC
Pump direction (CW/CCW) via open collector or contact closure
Start/stop via open collector or contact closure
Membrane keypad for easy up-front control of speed, direction, and start/stop
Designed with speed range of 6 to 600 rpm

INCLUDES

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

MORE ABOUT THIS ITEM

These accurate analog console drives have powerful motors, speed display, and Â±0.25% speed control for precise flow regulationâ€”ideal for metering applications. Remote speed control requiresÂ DB9 male connectorÂ orÂ cable assembly. Use remote connector for control of start/stop via contact closure or open collector (5 V TTL);Â control start/stop via footswitchÂ orÂ handheld remote.

Specifications & Description

Pump Series L/S
Cloud Connected No
Control Type Digital
Min RPM (rpm) 6
Max RPM (rpm) 600
Speed Variable
Speed Control Â±0.25% (1 rpm at 600)
Max Flow Rate (mL/min) 3400
Min Flow Rate (mL/min) 0.36
Reversible Motor Yes
Digital Dispensing No
No. of Pump Heads Accepted 2
Type of Pump Heads Accepted Standard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm
Motor (watts) 75
Drive IP rating IP 33
Washdown Capable No
Power (VAC) 90 to 260
Power (amps) 2.2
Power (Hz) 50/60
Drive Length (in) 10.7968
Drive Width (in) 8.3125
Drive Height (in) 8.5
Drive Length (mm) 274
Drive Width (mm) 211
Drive Height (mm) 216
Open-Head Sensor No
Housing Material ABS Plastic and Aluminum
Motor hp 1/10
Remote I/O 4 to 20 mA, 0 to 10 V, start/stop and direction via contact closure
Description L/S Variable-Speed Digital Drive with Remote I/O, 6 to 600 rpm; 90 to 260 VAC