Drive Masterflex L/S 100RPM 115/230

INCLUDES

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

KEY FEATURES

Flow rate 0.06 to 3400 mL/minâ€”flow rate depends on drive rpm, pump head, and tubing size
Three digit LED display shows motor rpm â€” confirm speed setting at a glance
Reversible motorâ€”purge tubing before or after pumping; pump fluid in either direction
LED indicators confirm motor direction
Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications
Separate speed and power (on/off) control â€” maintain speed setting while turning pump on/off
Stackable, splash-resistant ABS plastic housing; IP33 rated
Remote control capabilities via a DB9 female connector on back of drive
Speed control input: 4 to 20 mA or 0 to 10 VDC
Pump direction (CW/CCW) via open collector or contact closure
Start/stop via open collector or contact closure
Membrane keypad for easy up-front control of speed, direction, and start/stop
Designed with speed range of 1 to 100 rpm

MORE ABOUT THIS ITEM

These accurate analog console drives have powerful motors, speed display, and Â±0.25% speed control for precise flow regulationâ€”ideal for metering applications. Remote speed control requiresÂ DB9 male connectorÂ orÂ cable assembly. Use remote connector for control of start/stop via contact closure or open collector (5 V TTL);Â control start/stop via footswitchÂ orÂ handheld remote.

Specifications & Description

Pump Series - L/S
Cloud Connected - No
Control Type - Digital Variable Speed
Min RPM (rpm) - 1
Max RPM (rpm) - 100
Speed - Variable
Speed Control - Â±0.25% (1 rpm at 600 and 300 rpm; 0.1 rpm at 100 rpm)
Max Flow Rate (mL/min) - 580
Min Flow Rate (mL/min) - 0.06
Reversible Motor - Yes
Digital Dispensing - No
No. of Pump Heads Accepted - 4
Type of Pump Heads Accepted - Standard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm, Cytoflow
Motor (watts) - 75
Drive IP rating - IP 33
Washdown Capable - No
Power (VAC) - 90 to 260
Power (amps) - 2.2
Power (Hz) - 50/60
Drive Length (in) - 10.7968
Drive Width (in) - 8.3125
Drive Height (in) - 8.5
Drive Length (mm) - 274
Drive Width (mm) - 211
Drive Height (mm) - 216
Open-Head Sensor - No
Housing Material - ABS Plastic and Aluminum
Motor hp - 1/10
Remote I/O - 4 to 20 mA, 0 to 10 V, start/stop and direction via contact closure
Description - L/S Variable-Speed Drive w/ Remote I/O; 100 rpm