SKU: CP/P-77964-20

Masterflex I/P Stainless Steel Process Pump with Easy-Load Head, 650 rpm

Pre-order

RM 39,844.00

Pre-order

Maintenance-free drives built for precision dispensing
  • Flow rate 0.001 to 8 LPM with included I/P tubing—flow rate depends on drive rpm, pump head, and tubing size
  • Digital interface with graphical LCD shows pump performance and operating mode— continuous run, timed dispense, copy dispense, or volume dispense
  • Remote control available using analog communication—voltage, current and contact closure
  • Select your preferred language from the user-friendly menu for programming and operation
  • Dispense by Volume in mL (0.001 to 9,999 mL), L, or gal; Copy—1 to 9,999 dispense cycles; or Time—time interval of on/off cycles (1 sec to 99 hr, 59 min, 59 sec per cycle)
  • Antidrip function ensures dispensing accuracy
  • Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio
  • Rugged housing is NEMA 4X (IP66) rated for washdown
  • Choose models with open head sensor technology for enhanced user safety
  • Constructed of a 316 stainless steel housing with an anodized aluminum base—ideal for pharmaceutical, dairy, biotech, and food and beverage applications

INCLUDES

I/P drive 77420-10, Easy-Load pump head 77602-10, 10-ft of C-Flex ULTRA® tubing, and 6-ft (1.8-m) line cord with IEC 320/CEE22 socket. Drives are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

MORE ABOUT THIS ITEM

These I/P® digital pump systems give you rugged performance and precise digital control. These full featured drives are ideal for fluid transfer, dispensing, and metering applications in laboratory, process, and industrial environments including pharmaceutical, food & beverage, dairy, chemical, manufacturing, and water treatment. The NEMA 4X (IP66) rated housings are completely sealed, easy-to-clean, and resistant to commonly used cleaning and sanitizing solutions.

Precision drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing by time or by volume. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size. Program the drive via the simple membrane keypad; keypad lock/unlock feature protects settings. Select tubing size and enter desired flow rate—drive locks in required rpm.

Specifications & Description

  • Pump Series: I/P
  • Control Type: Variable-Speed Digital
  • Min RPM: 0.1
  • Max RPM: 650
  • Number of Channels: 1
  • Max Flow Rate Per Channel (LPM): 8
  • Min Flow Rate Per Channel (LPM): 0.001
  • Max Flow Rate Per Channel (mL/min): 8000
  • Min Flow Rate Per Channel (mL/min): 1
  • Drive: 77420-10 (I/P® Digital Console Process Drive)
  • Pump Head: 77602-10 (I/P® Easy-Load Pump Head)
  • Tubing: 06434-73, 10-ft (C-FLEX® Ultra, I/P® 73)
  • Tubing sizes accepted: I/P® 26, 73, 82
  • Drive IP rating: IP 66
  • Power (VAC): 115 / 230
  • Power (amps): 4.5A at 115v; 2.5A at 230v
  • Power (Hz): 50/60
  • Width (in): 11.13
  • Height (in): 12.88
  • Length (in): 19.69
  • Width (cm): 28.27
  • Height (cm): 32.72
  • Length (cm): 50.01
  • Open-Head Sensor: No
  • Housing Materia: lStainless Steel
  • Description: I/P Stainless Steel Process Pump w/ Easy-Load Head; 650 rpm